Okay, so, I saw this “LV Chair” thing online and thought, why not give it a shot? I mean, it looked pretty cool, and I’ve been itching to try a new DIY project.
Getting Started
First things first, I had to gather all the materials. I went to the local hardware store and picked up some wood, screws, and some basic tools. I already had a saw and a drill at home, so that saved me some time and money. I opted for some decent quality wood because I wanted this chair to last. It was a bit of a splurge, but hey, treat yourself, right?
The Process
I started by measuring and cutting the wood. Now, I’m no carpenter, so this part took a while. I double-checked all the measurements to make sure everything was even. “Measure twice, cut once,” as they say. Then came the drilling. I drilled pilot holes for the screws to make sure the wood wouldn’t split. Again, I took my time with this, and it was pretty therapeutic, to be honest.
After that, I assembled the frame of the chair. This was probably the trickiest part. Getting all the pieces to fit together just right was a bit of a puzzle, but I managed. I used wood glue in addition to the screws for extra strength. Can’t be too careful, you know?
Adding the LV Touch
Now, for the fun part, the LV part. I got some faux leather with the classic LV pattern online. It wasn’t cheap, but it looked pretty authentic. I carefully cut the fabric to fit the seat and backrest of the chair. I used a staple gun to attach the fabric to the wood. It was a bit tricky to get it smooth and wrinkle-free, but I think I did a pretty good job.
- Measured and cut the wood
- Drilled pilot holes
- Assembled the frame
- Cut and attached the LV fabric
The Result
Finally, after a few days of work, the chair was done! It actually turned out better than I expected. It’s sturdy, comfortable, and it definitely has that luxurious LV vibe. I’m pretty proud of myself, not going to lie. It’s not perfect, but it’s mine, and I made it with my own two hands.

I’ve been using it as my main desk chair, and it’s been great. It’s a conversation starter for sure. Everyone who’s seen it has been impressed. I even had a friend ask if I could make one for them. Maybe I’ll start a little side hustle, who knows?
Overall, this project was a blast. It was challenging, but also really rewarding. If you’re thinking about trying something similar, I say go for it. Just be prepared to put in some time and effort, and don’t be afraid to make mistakes. That’s how you learn, right? Plus, you’ll end up with a unique piece of furniture that you can be proud of.